{
  "Main_body_fixed_mm.stl": {
    "watertight": true,
    "winding_consistent": true,
    "extents_mm": [
      126.39999389648438,
      172.8000030517578,
      128.6999969482422
    ],
    "triangles": 357334,
    "sha256": "db242edbfd229ad16f44327411b0b2bf5ee8133dc81aa282d0a8f7f5037b3b7a"
  },
  "Main_body_with_supports_mm.stl": {
    "watertight": true,
    "winding_consistent": true,
    "extents_mm": [
      126.39999389648438,
      172.8000030517578,
      128.6999969482422
    ],
    "triangles": 411454,
    "sha256": "26b4c680c606b04cc50f67f0d924ece38b2e588781a46b2db3fbe0b9819bebb0"
  },
  "Rear_mount_glue_on_mm.stl": {
    "watertight": true,
    "winding_consistent": true,
    "extents_mm": [
      50.0,
      84.0,
      44.5
    ],
    "triangles": 23980,
    "sha256": "e2286f924cbdd486c13ec3371a5d9a06060bb9ec8d174b7ab60e8baebcae0f3e"
  },
  "Removable_supports_mm.stl": {
    "watertight": true,
    "winding_consistent": true,
    "extents_mm": [
      123.20000076293945,
      168.04999351501465,
      56.0
    ],
    "triangles": 54120,
    "sha256": "4fea46dc7999c45c543fdcf9b80632bb3270e45499c87e96402dd255ecf81d28"
  },
  "slicing": {
    "slicer": "OrcaSlicer 2.4.2",
    "reference_machine": "Bambu Lab P1S 0.4 nozzle, validation reference only; actual printer unknown",
    "layer_height_mm": 0.2,
    "wall_loops": 2,
    "infill": "8% gyroid",
    "auto_support": false,
    "bed": "Textured PEI 55 C",
    "nozzle": "220 C Generic PLA",
    "estimated_seconds": 45719,
    "estimated_filament_g": 406.05,
    "layers": 643,
    "warnings": [
      {
        "msg": "bed_temperature_too_high_than_filament",
        "level": "3",
        "error_code": "1000C001"
      }
    ],
    "exit_code": 0,
    "physical_print_tested": false,
    "support_metadata_note": "Support is modeled geometry, hence slicer native support_used=false is expected."
  },
  "glb": {
    "bounds_metres": [
      [
        0.02,
        0.0,
        -0.19880000305175782
      ],
      [
        0.22,
        0.1286999969482422,
        -0.026000000000000002
      ]
    ],
    "standard_unit": "metre"
  }
}